Ashley Furniture Twin Bed – A double bed is big enough for an adult to sleep on. Although this is not a large bed compared to a queen or king size mattress, the setting of a double bed in a small room still possesses challenges. The idea is to make the most of the space so the room does not feel too small. You need to take into account other furniture in the room you will be holding and if your need for space is one of function or illusion. The conversion of a double bed frame with a double bed frame is easy. This eliminates the need to buy a new bed frame since you can simply adjust the double bed to fit your mattress.
It is also a good way to recycle the old bed frame and continue to use it without contributing to the environmental dump. Remove the frame from the ashley furniture twin bed and check if you have all the pieces you need to create a double bed. Double-sized metal frames usually consist of two long side rails, each with an extendable metal arm attached to each end. Remove the nuts and bolts with your wrench to remove the frame. Extend the arms of the side rails’ and locate the pins on them. The pins look like small pieces of metal that can be adjusted to create a full-size bed. The arm on the opposite side must have two holes.
Hold the second pin in one of the arms of the side rails and slide it into the second hole of the other arm. Pull this out and make sure it locks in its position. Repeat the step with the arms of the opposite end. Position the rails ashley furniture twin bed 54 inches apart to cover the width of your full-size mattress. Use your tape measure to get the exact measurements. Use the two metal strips to extend the width of the twin bed frame at the top and bottom area. This will create an overlap of about 5 inches on each side of the strip.