Zayley Twin Bookcase Bed -One of the advantages of library headers is the extra storage it provides. Not only can you put books on it, but it is also a great place trophy and other items of value. Build yours from the wood to make adding a lamp or other reading aids, a snap. Once built, it easily secures the bed frame with a drill and some screws. This makes it easy to move because it is independent of the bed frame. for each of the 45-inch long pieces of wood, measured from one end and make marks at 15 3/4 and 16 1/2 inches. Place the framing square on the marks and lines of the width of the pieces.
These are the sides of the double Library header. Make marks on the two 38 1/2-inch pieces (upper and lower shelves) on 18 7/8 and 5/8 of 19 inches. Draw lines across the width of these two pieces as the sides. This marks the center of the top and bottom shelves of the shelf. Apply glue to the ends of the 15-inch piece (divider). Sure it is between the upper and lower shelves in the line that indicates its location with the finishing nails. Wipe excess glue immediately with a damp cloth. Apply a strip of glue on the ends of the top and bottom shelves. Place them between the parties. Fix the shelves of the zayley twin bookcase bed at the end of the sides with the lines indicating the location of the lower shelf.
12 Photos Gallery of: Wooden Design Zayley Twin Bookcase Bed
Secure the pieces with the finishing nails. Next, glue the edges of the shelves, sides between the shelves and divider. Place the piece of thick 1/4 inch plywood, aligning the edges. Secure it to the library with the nails in the box. Zayley twin bookcase bed stand on one side. Put glue on the three edges of the 3/4 inch plywood and place it on the bottom shelf of the shelf and between the parts. Fix it with the finishing nails. Clean the glue.